Tag Archives: Pulse Connect Secure

NTP Authentication on Pulse Connect Secure

I initially wanted to show how to use NTP authentication on a Pulse Connect Secure. Unfortunately, it does not support NTP over IPv6, which is mandatory for my lab. Ok, after I calmed down a bit, a configured it with legacy IP and got NTP authentication running. ;) Here’s how:

Continue reading NTP Authentication on Pulse Connect Secure

Pulse Connect Secure: Easy Deployment Poster

For a beginner, the configuration of a Juniper Secure Access SA/MAG Pulse Connect Secure device is not that simple. There are too many options and links that must be filled in. Though there are quite detailed configuration guides I was missing a “quick start” figure to see which profiles, roles, etc. must be set in order to have a simple login and group membership environment.

Here comes my at-a-glance poster for the Pulse Connect Secure SSL-VPN gateway.

Continue reading Pulse Connect Secure: Easy Deployment Poster