During my analysis of NTP and its traffic to my NTP servers listed in the NTP Pool Project I discovered many ICMP error messages coming back to my servers such as port unreachables, address unreachables, time exceeded or administratively prohibited. Strange. In summary, more than 3 % of IPv6-enabled NTP clients failed in getting answers from my servers. Let’s have a closer look:
This post is not about software but hardware tools for network admins. Which network gadgets am I using during my daily business? At least three, namely the Airconsole, the Pockethernet and the ProfiShark, which help me in connecting to serial ports, testing basic network connectivity, and capturing packets in a high professional way. Come in and have a look at how I’m working.
And again: Here comes a pcapng capture taken for the dynamic routing protocol EIGRP. If you want to dig into EIGRP messages, download the trace file and browse around it with Wireshark. Since I used both Internet Protocols (IPv6 and legacy IP), MD5 authentication, route redistribution, etc., you can find many different messages in it.
Here comes a small lab consisting of three Cisco routers in which I used OSPFv3 for IPv6 with IPsec authentication. I am listing the configuration commands and some show commands. Furthermore, I am publishing a pcapng file so that you can have a look at it with Wireshark by yourself.
I already had an OSPFv2 for IPv4 lab on my blog. However, I missed capturing a pcap file in order to publish it. So, here it is. Feel free to have a look at another small lab with three Cisco routers and OSPFv2. Just another pcapng file to practise some protocol and Wireshark skills.
Last but not least I was interested which “home-calling” connections my Yamaha R-N500 Network Receiver initiates. In my previous post I already analyzed the open ports within the network, while I showed a complete Apple AirPlay capture here. This time I was only interested in outgoing TCP/UDP connections to the Internet as well as how the Yamaha App “NP Controller” communicates with the receiver.
It turned out that it was not easy for me to fully analyze such a packet trace even though only a couple of connections were made. It consists of many protocols that I am not familiar with such as UPnP, MDNS, SSDP, and RTP. Anyway, ere we go:
If you are following the daily IT news you have probably seen many articles claiming they have scanned the whole Internet for this or that. Indeed there are tools such as the ZMap Project “that enable researchers to perform large-scale studies of the hosts and services that compose the public Internet”.
This time I was not interested in scanning something, but in the question about “how many scans happen during one day on my home ISP connection?” Or in other words: What is the Internet background noise as seen by almost any customer? For this I sacrificed my Internet connection at home for 24 hours, while a factory-resetted router established a fresh Internet connection (IPv6 & IPv4) without any end devices behind it. No outgoing connections that could confuse or trigger any scans. That is: All incoming connections are really unsolicited and part of some third-party port scans, worm activities, or whatever. Using a network TAP device I captured these 24 hours and analyzed them with Wireshark.
In this blogpost I will present some stats about these incoming port scans. Furthermore I am publishing the pcap file so you can have a look at it by yourself.
Since a couple of months I am carrying a ProfiShark 1G always with me. It’s a small network aggregation TAP that fits into my bag (unlike almost any other TAPs or switches with SPAN functionalities). It runs solely via USB 3.0, hence no additional power supply nor network port on my laptop is required to get it running.
In this post I’ll give some hints on how to use the ProfiShark 1G with Windows (read: some initial problems I had and how to solve them) as well as some use cases out of my daily work with it.
I was interested in how Apple AirPlay works in my network. I am using an iPad to stream music to a Yamaha R-N500 network receiver. There is a great Unofficial AirPlay Protocol Specification which already shows many details about the used protocols. But since I am a networking guy I captured the whole process in order to analyze it with Wireshark.
I am using Nmap every time I installed a new server/appliance/whatever in order to check some unknown open ports from the outside. In most situations I am only doing a very basic run of Nmap without additional options or NSE scripts.
Likewise I am interested in how the Nmap connections appear on the wire. Hence I captured a complete Nmap run (TCP and UDP) and had a look at it with Wireshark. If you’re interested too, feel free to download the following pcap and have a look at it by yourself. At least I took some Wireshark screenshots to give a first glance about the scan.