I already had an OSPFv2 for IPv4 lab on my blog. However, I missed capturing a pcap file in order to publish it. So, here it is. Feel free to have a look at another small lab with three Cisco routers and OSPFv2. Just another pcapng file to practise some protocol and Wireshark skills.
While reading the OSPF chapter in the Cisco CCNP ROUTE learning guide, I was interested in how to visualize an OSPF area. Since every router in the same area has a complete view of all routers and networks, it should be easy to draw a map. So, I searched through the web for this kind of OSPF plotter and found two different approaches. While none of them worked out of the box, I was able to run one of them with an additional software router (Quagga) inside my OSPF area which finally drew a map. Yeah. Here we go:
I tested OSPF for IPv4 in my lab: I configured OSPF inside a single broadcast domain with five devices: 2x Cisco Router, Cisco ASA, Juniper SSG, and Palo Alto PA. It works perfectly though these are a few different vendors.
I will show my lab and will list all the configuration commands/screenshots I used on the devices. I won’t go into detail but maybe these listings help for a basic understanding of the OSPF processes on these devices.