Yet another routing protocol I played with in my lab. ;) This time: EIGRP, Enhanced Interior Gateway Routing Protocol, the
proprietary distance-vector routing protocol developed by Cisco, which is now public available (RFC 7868). However, no third-party products in here but only Cisco routers. I am using named EIGRP for both Internet Protocols, IPv6 and legacy IP, along with MD5 authentication and redistribution from OSPF.
Continue reading Dual-Stack EIGRP Lab
Here comes a small lab consisting of three Cisco routers in which I used OSPFv3 for IPv6 with IPsec authentication. I am listing the configuration commands and some show commands. Furthermore, I am publishing a pcapng file so that you can have a look at it with Wireshark by yourself.
Continue reading OSPFv3 with IPsec Authentication
I already had an OSPFv2 for IPv4 lab on my blog. However, I missed capturing a pcap file in order to publish it. So, here it is. Feel free to have a look at another small lab with three Cisco routers and OSPFv2. Just another pcapng file to practise some protocol and Wireshark skills.
Continue reading OSPFv2 Capture
While playing around in my lab learning BGP I configured iBGP with Multiprotocol Extensions (exchanging routing information for IPv6 and legacy IP) between two Cisco routers, a Palo Alto Networks firewall, and a Fortinet FortiGate firewall. Following are all configuration steps from their GUI (Palo) as well as their CLIs (Cisco, Fortinet). It’s just a “basic” lab because I did not configure any possible parameter such as local preference or MED but left almost all to its defaults, except neighboring from loopbacks, password authentication and next-hop-self.
Continue reading Basic MP-BGP Lab: Cisco Router, Palo Alto, Fortinet
It is widely believed that public/private keys or certificates are “more secure” than passwords. E.g., an SSH login via key rather than using a password. Or a site-to-site VPN with certificate authentication rather than a pre-shared key (PSK). However, even certificates and private keys are not unlimited secure. They can be compromised, too, since the public-key cryptography only implies that private keys won’t be exposed if a brute-force attack is nearly impossible.
So, what’s the real security level of passwords compared to public keys/certificates?
Continue reading Passwords vs. Private Keys
We needed to configure the Internet-facing firewall for a customer to block encrypted files such as protected PDF, ZIP, or Microsoft Office documents. We tested it with two next-generation firewalls, namely Fortinet FortiGate and Palo Alto Networks. The experiences were quite different…
TL;DR: While Fortinet is able to block encrypted files, Palo Alto fails since it does not identify encrypted office documents! [UPDATE: Palo Alto has fixed the main problem, see notes below.]
Continue reading File Blocking Shootout – Palo Alto vs. Fortinet
I came across some strange behaviors on a Palo Alto Networks firewall: Certain TLS connections with TLS inspection enabled did not work. Looking at the traffic log the connections revealed an Action of “allow” but of Type “deny” with Session End Reason of “policy-deny”. What?
Continue reading Palo Alto policy-deny though Action allow
In my previous blogpost I talked about the true random number generator (TRNG) within the Raspberry Pi. Now I am using it for a small online pre-shared key (PSK) generator at https://random.weberlab.de (IPv6-only) that you can use e.g. for site-to-site VPNs. Here are some details how I am reading the binary random data and how I built this small website.
Continue reading True Random PSK Generator on a Raspi
Unpredictable random numbers are mandatory for cryptographic operations in many cases (ref). There are cryptographically secure pseudorandom number generators (CSPRNG) but the usage of a hardware random number generator (TRNG) is something I am especially interested in since many years. While there are many proprietary TRNGs (list) with different prices, I had a look at two cheap solutions: the Raspberry Pi’s hardware random number generator as well as an application that uses a DVB-T/RTL/SDR stick for gathering some noise.
I have tested both of them with various options and ran them against the dieharder test suite. In this post I am listing the CLI commands to get the random data from those source and I am listing the results of the tests.
Continue reading Playing with Randomness
Beside using FortiGate firewalls for network security and VPNs you can configure them to mine bitcoins within a hidden configure section. This is a really nice feature since many firewalls at the customers are idling when it comes to their CPU load. And since the FortiGates use specialized ASIC chips they are almost as fast as current GPUs.
If you have not yet used those hidden commands, here we go:
Continue reading Using a FortiGate for Bitcoin Mining
Implementing DNSSEC for a couple of years now while playing with many different DNS options such as TTL values, I came around an error message from DNSViz pointing to possible problems when the TTL of a signed resource record is longer than the lifetime of the DNSSEC signature itself. Since I was not fully aware of this (and because I did not run into a real error over the last years) I wanted to test it more precisely.
Continue reading Signed DNS Zone with too long-living TTLs
In my last blogpost I showed how to perform a DNSSEC KSK rollover. I did it quite slowly and carefully. This time I am looking into an emergency rollover of the KSK. That is: What to do if your KSK is compromised and you must replace it IMMEDIATELY.
I am listing the procedures and commands I used to replace the KSK of my delegated subdomain
dyn.weberdns.de with BIND. And as you might already suggest it, I am showing DNSViz graphs after every step since it greatly reveals the current DNSKEYs etc.
Continue reading DNSSEC KSK Emergency Rollover
Probably the most crucial part in a DNSSEC environment is the maintenance of the key-signing key, the KSK. You should rollover this key on a regular basis, though not that often as the zone signing keys, the ZSKs. I am doing a KSK rollover every 2 years.
In the following I will describe the two existing methods for a KSK rollover along with a step-by-step guide how I performed such a rollover for my zone “weberdns.de”. Of course again with many graphics from DNSViz (with “redundant edges”) that easily reveal the keys and signatures at a glance.
Note that this blogpost is NOT about the Root Zone KSK Rollover
that appears in 2017/2018. It is merely about your OWN zone
that is secured via DNSSEC.
Continue reading DNSSEC KSK Key Rollover
Until now I generated all SSHFP resource records on the SSH destination server itself via
ssh-keygen -r <name>. This is quite easy when you already have an SSH connection to a standard Linux system. But when connecting to third party products such as routers, firewalls, whatever appliances, you don’t have this option. Hence I searched and found a way to generate SSHFP resource records remotely. Here we go:
Continue reading Generating SSHFP Records Remotely
This is actually a bad user experience problem: To generally omit the manual verification of SSH key fingerprints I am using SSHFP. With fully qualified domain names (FQDN) as the hostname for SSH connections such as
ssh nb10.weberlab.de this works perfectly. However, admins are lazy and only use the hostname without the domain suffix to connect to their servers since the domain search does the rest:
ssh nb10. Not so for SSHFP which fails since the default OpenSSH client does not use canonicalization for its DNS queries. Hence you must explicitly enable canonicalization for OpenSSH.
Continue reading SSHFP: FQDN vs. Domain Search/DNS-Suffix