Endlich war es soweit: Das eigene Haus stand vor der Tür und Johannes hat sich um die Netzwerkverkabelung und das Netzwerkdesign gekümmert. Hier eine Zusammenfassung meiner Gedanken und deren Umsetzung – offen für kritische Rückfragen, Verbesserungsvorschläge und Bewunderungsbekundungen. :)
As we have just set up a TLS capable syslog server, let’s configure a Fortinet FortiGate firewall to send syslog messages via an encrypted channel (TLS). Let’s go:
As we have just set up a TLS capable syslog server, let’s configure a Palo Alto Networks firewall to send syslog messages via an encrypted channel. While it was quite straightforward to configure I ran into a couple of (unresolved) problems as I added and deleted some syslog servers and their certificates. Uhm.
Some years ago I wrote a blog post called “Basic syslog-ng Installation“. While I used it myself quite often in my labs or at the customers’ sites, it shows only basic UDP transport which is both unreliable and insecure. So, let’s have a look at a fresh installation of syslog-ng with TLS support for security reasons. However, TCP and UDP as transport are covered as well for the support of legacy systems.
Again and again, I am adding some protocol samples to the Ultimate PCAP. Just for reference. And because I can. ;D
This is a guest blog post by Erik Hjelmvik, an expert in network forensics and network security monitoring at NETRESEC.
PolarProxy is a transparent TLS proxy that outputs decrypted TLS traffic as PCAP files. PolarProxy doesn’t interfere with the tunnelled data in any way, it simply takes the incoming TLS stream, decrypts it, re-encrypts it and forwards it to the destination. Because of this PolarProxy can be used as a generic TLS decryption proxy for just about any protocol that uses TLS encryption, including HTTPS, HTTP/2, DoH, DoT, FTPS, SMTPS, IMAPS, POP3S and SIP-TLS.
PolarProxy is primarily designed for inspecting otherwise encrypted traffic from malware, such as botnets that use HTTPS for command-and-control of victim PCs. Other popular use cases for PolarProxy is to inspect encrypted traffic from IoT devices and other embedded products or to analyze otherwise encrypted traffic from mobile phones and tablets. The fact that PolarProxy exports the decrypted traffic in a decrypted format without any TLS headers also enables users to inspect the decrypted traffic with products that don’t support TLS decryption, such as intrusion detection and network forensics products like Suricata, Zeek and NetworkMiner.
I got an interesting question through the comments section on my blog:
Quite a good questions. Let’s have a look:
The other day I wanted to verify whether a service running on my Linux server was listening on IPv6 as well as IPv4. It turned out that it wasn’t that easy to answer – if at all.
Continue reading Services listening on IPv6 and IPv4 (or maybe not?)
I was missing a generic layer 4 ping in my toolbox. Initially searching for a mere TCP ping, I have found Nping which completely satisfies my needs and gives so much more. ;)
What’s a layer 4 ping, and why? –> A normal ping (= ICMP echo-request) reveals whether the destination IP address, that is: the mere server/VM, is up and running. That’s great for a layer 3 networker since routing to and from the destination is already working. However, it does NOT reveal whether or not a service at layer 4 (TCP or UDP) is up and running as well. That’s what a layer 4 ping is about: sending TCP SYNs to the port in question, waiting for a “SYN ACK” (port is listening) or “RST”/no reply (port is not available). Common use cases: Waiting for a service to start again after an upgrade, or waiting for new firewall policies (to allow or deny) a certain port.
I am constantly trying to add more protocols to the Ultimate PCAP. Hence I used some time in my (old) Cisco lab to configure and capture the following protocols: IS-IS, GLBP, and VRRP. And since Alexis La Goutte sent me some CAPWAP traffic, this protocol is also added. All packets are now found in another update of the Ultimate PCAP. Here are some details:
Continue reading Capturing – because I can: IS-IS, GLBP, VRRP
The other day I was searching for a trace file with a decent protocol mix that could be used to introduce a few colleagues to Wireshark. This brought me to Johannes Weber and his Ultimate PCAP.
To get a first impression of a trace file I used Wireshark’s protocol hierarchy – and boy, that’s a lot of protocols. This was not exactly what I was looking for: This single trace file holds snippets from 2014 to 2020 with a myriad of protocols and IP networks. Unfortunately, it’s nothing like the protocol mix found in a network analysis project.
Nevertheless, the trace file caught my interest as a long time Wireshark user. After nearly 20 years of network analysis, I had my own collection of traces with a few odd frames. To my big surprise, I had recorded a few protocols that are not yet part of the Ultimate PCAP.
So here is my small contribution to this collection:
Continue reading Adding some packets: RARP, SNAP, MPLS & More
More than 6 years ago (!) I published a tutorial on how to set up an IPsec VPN tunnel between a FortiGate firewall and a Cisco ASA. As time flies by, ASA is now able to terminate route-based VPN tunnels (which is great!), we have IKEv2 running everywhere and enhanced security proposals. Hence, it’s time for an update:
Continue reading Route-Based VPN Tunnel FortiGate <-> Cisco ASA
More than 6 years ago (!) I published a tutorial on how to set up an IPsec VPN tunnel between a Palo Alto Networks firewall and a Cisco ASA. As time flies by, ASA is now able to terminate route-based VPN tunnels (which is great!), we have IKEv2 running everywhere and enhanced security proposals. Hence, it’s time for an update:
Continue reading Route-Based VPN Tunnel Palo Alto <-> Cisco ASA
The NTP Pool is a volunteer organization that provides time synchronization service to hundreds of millions of computers worldwide. A typical client might query a particular NTP Pool server ~10-60 times/hour. Wikipedia lists some abusive clients that far exceeded the normal rate. This wastes NTP server resources, may interfere with other clients, and can trigger DDoS protections. In late 2019, a software update made some FortiGate firewalls very unfriendly to the NTP Pool.
Continue reading FortiGate bug: firewalls sending excessive requests to the NTP Pool
An updated version of my Ultimate PCAP is available. It features some more network protocols that I will depict in this blog post. It’s getting more special since the most common protocols were already in there. ;)