… since we all can use
pool.ntp.org ? Easy answer: Many modern (security) techniques rely on accurate time. Certificate validation, two-factor authentication, backup auto-deletion, logs generation, and many more. Meanwhile we use an unauthenticated protocol (via stateless UDP) from unauthenticated sources (NTP pool) to rely on! Really?
TL;DR: If you want to operate a secure environment you should use your own on-site stratum 1 NTP servers along with authentication. This is the only way to eliminate time spoofing attacks from the outside. Don’t reduce your overall security to a stateless and unauthenticated (read: easy-to-spoof) network protocol!
If you are using couple of different NTP sources it might be not that easy for an attacker to spoof your time – though not unfeasible at all. And think about small routers with VPN endpoints and DNSSEC resolving enabled, or IoT devices such as cameras or door openers – they don’t even have a real-time clock with battery inside. They fully rely on NTP.
This is what this blogpost series is all about. Let’s dig into it. ;)
Continue reading Why should I run own NTP Servers?
Working with Infoblox can be challenging when it comes to their naming of features, licenses, marketing slides, and GUI options. So let’s bring some clarity into this chaos. :D I have listed the most common DNS security features and their corresponding Infoblox names. I hope you folks can use it as well.
Continue reading Infoblox Features & Licenses Naming Clarity
This post is not about software but hardware tools for network admins. Which network gadgets am I using during my daily business? At least three, namely the Airconsole, the Pockethernet and the ProfiShark, which help me in connecting to serial ports, testing basic network connectivity, and capturing packets in a high professional way. Come in and have a look at how I’m working.
Continue reading My Network Gadgets
I was interested in how a recursive DNS server resolves DNS queries in detail. That is, not only the mere AAAA or A record, but also DNSSEC keys and signatures, the authority and additional section when testing with
dig , and so on. For this I made two simple DNS queries to my recursive DNS server which resulted in more than 100 DNS packets at all. Wow.
In the following I am publishing a downloadable pcap so that you can analyse it by yourself. Furthermore I am showing some listings and screenshots to get an idea of the DNS resolution process.
Continue reading Single DNS Query – Hundreds of Packets
I got an email where someone asked whether I know how to change the link-local IPv6 addresses on a FortiGate similar to any other network/firewall devices. He could not find anything about this on the Fortinet documentation nor on Google.
Well, I could not find anything either. What’s up? It’s not new to me that you cannot really configure IPv6 on the FortiGate GUI, but even on the CLI I couldn’t find anything about changing this link-local IPv6 address from the default EUI-64 based one to a manually assigned one. Hence I opened a ticket at Fortinet. It turned out that you cannot *change* this address at all, but that you must *add* another LL address which will be used for the router advertisements (RA) after a reboot (!) of the firewall. Stupid design!
Continue reading Trying to change an IPv6 Link-Local Address on a FortiGate
I did a session at SharkFest’18 Europe in Vienna with the title of “Crash Course: IPv6 and Network Protocols“. Since the presentation slides + audio were recorded you can listen to the talk, too. Here are some notes about the motivation for this session as well as feedback from the attendees.
Continue reading SharkFest’18 Europe: Crash Course: IPv6 and Network Protocols
During the last few weeks I published a couple of blogposts concerning routing protocols such as BGP, OSPFv3, and EIGRP. (Use the “Cisco Router” tag on my blog to list all of them.) They are all part of my current Cisco lab that I am using for my CCNP TSHOOT exam preparation. While I depicted only the details of the routing protocols in those blogposts, I am showing my overall lab with all of its Cisco IOS configs here. Just to have the complete picture. There are a couple of not-yet-blogged configs such as VRRP, GLBP, NTP authentication, embedded event manager (EEM), or route-maps and distribute/prefix lists though.
Continue reading My CCNP TSHOOT Lab: The Overall Picture
Cisco’s IOS offers an easy to use feature for configuration versioning to an external server such as TFTP or SCP. Furthermore, you can use IOS commands to compare any two snapshots and to roll back to one of them.
Continue reading Using Cisco’s IOS Archive
And again: Here comes a pcapng capture taken for the dynamic routing protocol EIGRP. If you want to dig into EIGRP messages, download the trace file and browse around it with Wireshark. Since I used both Internet Protocols (IPv6 and legacy IP), MD5 authentication, route redistribution, etc., you can find many different messages in it.
Continue reading EIGRP Capture
Yet another routing protocol I played with in my lab. ;) This time: EIGRP, Enhanced Interior Gateway Routing Protocol, the
proprietary distance-vector routing protocol developed by Cisco, which is now public available (RFC 7868). However, no third-party products in here but only Cisco routers. I am using named EIGRP for both Internet Protocols, IPv6 and legacy IP, along with MD5 authentication and redistribution from OSPF.
Continue reading Dual-Stack EIGRP Lab
Here comes a small lab consisting of three Cisco routers in which I used OSPFv3 for IPv6 with IPsec authentication. I am listing the configuration commands and some show commands. Furthermore, I am publishing a pcapng file so that you can have a look at it with Wireshark by yourself.
Continue reading OSPFv3 with IPsec Authentication
I already had an OSPFv2 for IPv4 lab on my blog. However, I missed capturing a pcap file in order to publish it. So, here it is. Feel free to have a look at another small lab with three Cisco routers and OSPFv2. Just another pcapng file to practise some protocol and Wireshark skills.
Continue reading OSPFv2 Capture
For those who are interested in analyzing basic BGP messages: I have a trace file for you. ;) It consists of two session establishments as I cleared the complete BGP session on two involved routers for it. Refer to my previous blogpost for details about the lab, that is: MP-BGP with IPv6 and legacy IP, neighboring via both protocols as well, with and without password. The involved routers were 2x Cisco routers, one Palo Alto Networks firewall, and one Fortinet FortiGate firewall.
Continue reading MP-BGP Capture
While playing around in my lab learning BGP I configured iBGP with Multiprotocol Extensions (exchanging routing information for IPv6 and legacy IP) between two Cisco routers, a Palo Alto Networks firewall, and a Fortinet FortiGate firewall. Following are all configuration steps from their GUI (Palo) as well as their CLIs (Cisco, Fortinet). It’s just a “basic” lab because I did not configure any possible parameter such as local preference or MED but left almost all to its defaults, except neighboring from loopbacks, password authentication and next-hop-self.
Continue reading Basic MP-BGP Lab: Cisco Router, Palo Alto, Fortinet
If you have ever read some docs or RFCs about IPv6 you should be quite familiar with the
2001:db8::/32 “IPv6 Address Prefix Reserved for Documentation”, RFC 3849. This RFC clearly states how you should handle addresses within this range: “This assignment implies that IPv6 network operators should add this address prefix to the list of non-routeable IPv6 address space, and if packet filters are deployed, then this address prefix should be added to packet filters.”
I was interested whether those addresses are actually used in the Internet. For this purpose I analyzed my firewall logs for 6 months to get an idea. Though it was not that much, I actually got a couple of connections inbound and outbound (!) sourced or destined to those reserved IPv6 addresses.
Continue reading 2001:db8::/32 in the Wild