Tag Archives: NetFlow

More Capture Details

In the previous post, I released my Ultimate PCAP which includes every single pcap I had so far on my blog. But that’s not all: I have some packets in there that were not yet published up to now. That is, here are some more details about those (probably well-known) protocols. These are:

Continue reading More Capture Details

Using NetFlow with nProbe for ntopng

This blog post is about using NetFlow for sending network traffic statistics to an nProbe collector which forwards the flows to the network analyzer ntopng. It refers to my blog post about installing ntopng on a Linux machine. I am sending the NetFlow packets from a Palo Alto Networks firewall.

My current ntopng installation uses a dedicated monitoring ethernet port (mirror port) in order to “see” everything that happens in that net. This has the major disadvantage that it only gets packets from directly connected layer 2 networks and vlans. NetFlow on the other hand can be used to send traffic statistics from different locations to a NetFlow flow collector, in this case to the tool nProbe. This single flow collector can receive flows from different subnets and routers/firewalls and even VPN tunnel interfaces, etc. However, it turned out that the “real-time” functionalities of NetFlow are limited since it only refreshes flows every few seconds/bytes, but does not give a real-time look at the network. It should be used only for statistics but not for real-time troubleshooting.

Continue reading Using NetFlow with nProbe for ntopng